Profile for SPAD.neXt to use behringer X-Touch mini as FBW A32NX Flight Deck
Layer A controls Capt.:
- Alarms and Warnings
- EFIS Control Unit
- Flight Control Unit
Rotary knob LEDs indicate selected QNH, ROSE, RANGE and ALT-mode
Master Alarms buttons blink when active to catch attention
Active push buttons light up
Rotary knobs pressed short: PUSH
Rotary knobs pressed long: PULL
Left rotary knob changes VHF frequency. Short press switches between whole and fractal numbers, long press swaps active and standby frequency.
Slider controls cockpit zoom
Layer B controls:
- Overhead External Light Panel
- Cockpit Lighting Capt.
Landing light button pressed short: TOGGLE lights
Landing light button pressed long: Lights OFF and RETRACT
Slider controls daytime by minutes (slow slide) and hours (fast slide).
A matching overlay for this profile is available at https://flightsim.to/file/53526/overlay-for-x-touch-mini-for-airbus-a320-family.
Known issues:
- Rotary knob LEDs light up while turning - use slow turn to avoid this behaviour
- The knobs an don’t match with Flightsim values especially after changing the X-Touch's layers (this is due to the fact that the X-Touch only performs the layer change in the device and does not pass it on to Windows).
You need to have:
- Behringer X-Touch mini https://www.behringer.com/product.html?modelCode=P0B3M
- SPAD.neXt (MSFS/FSX/P3D Edition) https://www.spadnext.com/home.html
- FBW A32NX (tested on development Version) https://flightsim.to/file/8486/flybywire-a32nx
3 months ago
RiverRaid
....it works absolutely fine and in my opinion:
this is the ultimate alternative autopilot combo to all those very expensive originals (which have their market), but this combo is very immersive and affordable!!
and maybe it could even be expanded?!?
@Foggy: do you see a chance to develop a similar profile for the Fenix A320 or maybe even a Boeing (PMDG) ?
I am willing to contribute for your effort!!!
Thanks again for this outstanding work, an absolute marvel!
5 months ago
4 months ago
Foggy
Clipper747pa
5 months ago
lifescanner
Now the QNH Knob works like a charm.
Thank for the excellent support !
5 months ago
lifescanner
Test also this QNH Error.
And like Pent874 , the QNH-Knob long press dont switch to standard pressure.
See in the APIdoc and find:
XMLVAR_Baro1_Mode 0..2 R/W Custom LVAR 0=QFE, 1=QNH, 2=STD
Maybe this helps to set standard mode ?
5 months ago
5 months ago
Foggy
lifescanner
5 months ago
5 months ago
Foggy
Pent874
I hope you update it also in the Future ?
6 months ago
6 months ago
Foggy
lifescanner
merci pour votre application,
a quoi correspond le bouton rotatif PDF/MDF?
cordialement
7 months ago
7 months ago
Foggy
jackflight
As an extra info, this profile also works flawlessly with the Headwing A330neo.
11 months ago
dblue_one
this is great, thank you!
12 months ago
Quacks63
Foggy using the experimental version of the FWB works flawlessly, but with the development version half the knobs and buttons dont work, do you think is a easy fix?
12 months ago
I've just installed the Development version, and everything works fine. Which knobs and buttons do not work for you?
12 months ago
Foggy
dblue_one
Very nicely done. Especially with your Spad profile. One question: Do you mind to embed the fonts you're using in the PDF? I am using Affinity Designer to edit and print the file. Thank you very much!!!
12 months ago
I've separated the overlay from the SPAD.NeXt profile: https://flightsim.to/file/53526/overlay-for-x-touch-mini-for-airbus-a320-family
Within this pdf-files the fonts are already embedded. Maybe you have to install them for an edit.
12 months ago
Foggy
navnak
Excellent. Thank you
1 years ago
dblue_one