Welcome to the NERIKENAUT Flight Companion Hub – a tool that lets you build your own profiles for the Stream Deck addon Flight Tracker to make your flights more immersive.
Important notice
To use this profile on your Stream Deck, you need to download and install “Flight Tracker”. Don't forget to give your thanks to Hy (the creator of Flight Tracker). Make sure to buy him a coffee or two.
Installation
Step 1 - Open the “Official Profiles” folder and install every profile by simply double clicking on them.
Step 2 – Install the NERIKENAUT FLIGHT COMPANION HUB
(Step 3 – If there’s an issue with the linking of the profiles, you can simply relink the profiles under “Official Profiles” after you completed step 1)
About the NERIKENAUT Flight Companion
The Flight Companion turns your StreamDeck into an interactive controller that allows you to control your aircrafts different systems and gives you an overview of your most crucial gauges. Every profile comes with a startup and takeoff checklists.
Features
- Get full control over your comms and frequencies - Hold the COM/NAV/XPDR buttons down on your StreamDeck to change your frequencies and squawk code. Push to switch between your standby and active frequencies.
- Control your aircrafts autopilot through the StreamDeck – In the navigation folder you’ll find your aircrafts autopilot functions.
- Checklists - Easy to follow startup, takeoff, landing and shutdown checklists to follow.
- Overview of your systems - Have an eye on your Ts and Ps to get to where you are going in the safest way possible.
- Full control of your lights - In the "Lights" folder you can easily access your lights panel without having to look around in the cockpit.
- Profiles by NERIKENAUT - The FLIGHT COMPANION HUB comes with nine profiles by me, these can be used as an inspiration for your profiles or simply to fly the Kodiak 100, Turbo Arrow, Twin Otter, Arrow III, Fox2, Seminole, RV-14, Skymaster II or the C310R.
- Create your own profiles - In the "Assets" folder you'll find all the readings you need to create your own profile for your very own aircraft.
- The profile is regularly updated when new features are added to “Flight Tracker”. If you want to see certain features implemented – don’t hesitate to reach out.
NERIKENAUT 
8 months ago
27 days ago
erixx11
BoraFly
9 months ago
amadi7
It works Great! I hit the ground running with the Steam Deck. and an using your Flight hub for my own aircraft layouts. Thanks
1 years ago
deckape964
bro, you are a genius. thx a lot.
can you make it for cessna planes too and a320 ? 3x5 ?
2 years ago
tomume
Great work, but where do I find the "Assets" folder ?
2 years ago
Eureka I found it !
2 years ago
Jabjolker
Jabjolker
Hi NERIKENAUT, many thanks for your work. Most Profiles I find are for SD XL an I cannot use them, as I don´t know how to convert them for my 5x3. I am glad having found your Profiles. And even before I try them, I say thank you very much. Greetings from Germany.
2 years ago
Quacks63
Hi, thank you for your work! In the video, it looked like when you completed various checklist items for startup, the color of the buttons would change from red to green as you completed them. But that isn't happening for me (C310R). I installed the Flight Tracker software beforehand. Am I missing a step somewhere?
Thank you again!
Roger
2 years ago
rogerabram
How will these work on the Stream Deck XL
2 years ago
Zenism
If we were using your single profiles on their own previously, should we remove them if we switch to this Hub? And Thanks
2 years ago
This is up to you. I will continue to update the stand alone profiles so if you don't want to use the Flight Companion Hub, you can just download the specific profile you need. All the profiles have been updated to match the ones that come with the Flight Companion Hub and I am totally fine with people don't feeling the need to have an entire tool to access one or two profiles. However if you want to use the Flight Companion Hub and access the profiles that way, I would remove all the profiles and simply download all at once from her. That way you get them in one folder and can access them easily.
Make sure to keep a copy of an old one if you made any changes that you'd like to take with you to the new ones. You can simply copy certain actions or changes over from the old one into the new.
2 years ago
NERIKENAUT
AirlockDoc
You said you were going to do this, AWESOME and Thank You!!!!
2 years ago
Thank you! Hope you enjoy it, let me know if there are any changes you'd like to see! :D
2 years ago
NERIKENAUT
Klaatu