This addon provides a panel for the new WTT autopilot module provided by WorkingTitle.
This is no classic addon to be stored inside the community folder. Instead you need the software Axis And Ohs.
The WTT module is an abstraction layer for airplane and addon creators. A first example is the combination of the pms50 GTN750 for the Flysimware Cessna 414. The pms50 GTN750 can be enhanced by an addon that provides access to the WTT module. The GTN750 will control this layer. The Cessna 414 on the other side reacts on the events by the WTT module. In the end any Avionics suite can control any special autopilot.
To be able to monitor the state of the autopilot i created this module. This is not limited to the abovementioned GTN750 and/or Cessna 414 because even the WT G1000 Nxi is using this module.
To install this panel you have to extract the folder into Documents/LorbyAxisAndOhs Files/UserGauges. When done you should have the file Ape42 WTT panel.xml and inside the folder 1024 the file Ape42 WTT panel.png.
To see the panel refer to the AAO documentation on how to show panels. You will find the panel as Ape42 WTT panel