Cessna 172 Tail dragger

Huidige Versie 2.1.0 door bagolu
Nog niet gedownload

Version 2.1.0
Eerste release April 18, 2021
Laatst Geupdate May 03, 2021
Bestandsgrootte 353.29 MB
Downloads 4,239
Dit bestand is gescand voor virussen en is veilig om te downloaden.
Wat zegt de Community?

Gebaseerd op 27 beoordelingen
Drag and Drop

Cessna 172 Skyhawk Tail dragger

A powerfull member of the short take-off and landing capable Skyhawk family built on a Lycoming 210HP STC :

This is a plane patch over Asobo's Skyhawk and adds a new plane to your hangar.

Cockpit settings : 

You will find two variants to download :

  • baglu-c172-bush-g1000.zip : to be used with any version of MSFS2020
  • baglu-c172-bush-classic.zip : only if you have the Classic 172 from premium version

Classic cockpit integration is a hack. Known issues with this variant :

  • avionics switches are ON at spawn (even with value set to OFF in the flt)
  • when you start manually, you can get the avionics to start
  • if you then press CTRL-E you have GPS, AP, ADF but not XPDR (it comes later... or not)
  • if you switch on/off BCN, it switches AP...
  • if you switch on/off NAV lights it switches XPDR...

Something is wrong there but the XML including all the logic is encrypted, I can not work it out and I can't reuse the one from the G1000 (systems are too different). I have no solution for that right now...

3D model modifications of the original Asobo Skyhawk plane included :

  • tail center wheel
  • large and stable bush wheels
  • Sportsman STOL Camber Cuffs on the wings
  • Increased flaps angle

Flight model modifications included :

  • more power from a STC 210HP 4 cylinders engine
  • 4 position flaps (0°, 10°, 20° and down to 40°)
  • enhanced brakes

Liveries included :

Several liveries are included with this plane : 
Default livery is from ANN0V
Burgondy is inspired by this plane : 172 Taildragger 
Brown is a fictional livery
Brown and beige is from ANN0V
Blue and gray is from ANN0V
Metal red is from ANN0V and is inspired from this story : Plane & Pilot Photo Of The Week: Brian Jenkins’ Bare Metal Beauty

All dirty liveries have been made by ANN0V

Notes to livery makers :

  • Registration numbers are split in two in panel.cfg : you will be able to set different colors for the wing and the side reg.
  • Common parts of the plane have the exact same name as the C172 AS1000 model
  • New parts have there textures in bush_172_* and tail_172_* files (wheels, landing gear...)
  • Stickers are baked in the model, if you want to replace with yours, edit the file : BUSH172_STICKERS_ALBD.PNG You can also remove the stickers with a transparent texture file.

EzRyder has made a very nice ALLInOne C172 Template. Don't miss that paint kit.

Flight model :
Flight model is based on reaperS73 work on the C172 STC 210HP STOL G1000 and allows to operate in a STOL mode in bush locations.

About this work : 
3D model has been made with blender from the export of Skyhawk G1000 Asobo's original model.
All the external textures and animations had to be redone and match the original definitions.
Bush wheels and legs come from the Asobo c152 and savage cub model.
A huge thanks to Newktv's developpement series that helped a LOT.
Huge thanks to beta testers : ANNOV, smvrf, Pops738
Many thanks to EzRyder who figured it out how to use the classic cockpit.

Vaak gestelde vragen

Pittig leeg hier.


Deze gebruikers hebben gedoneerd aan bagolu om hem geweldige add-ons te laten maken waar iedereen van kan genieten.

Pittig leeg hier.

  • Version 2.1.0 May 03, 2021

    Model update :
    - Propeller turning in the right direction now
    - Blurred propeller fixed
    - wheel legs repositionned
    - redesign of wheels and tires

    Liveries update in collaboration with ANN0V :
    - 3 models of tires
    - 6 clean liveries
    - 6 dirty and/or aged liveries

    Muddy runaways are now yours ! Enjoy your bush flights !

  • Version 2.0.0 April 21, 2021

    - Asobo C172 classic support thanks to EzRyder who figured out how to do it

    I hope you'll enjoy this new release.

    Please note that you MUST remove the older directory :
    from your community folder. You should have either or both :

  • Uitgebracht April 18, 2021

    Eerste versie van dit bestand is net uitgekomen. Welkom aan boord!

Pittig leeg hier.