Samenvatting
(NOT AI Generated) Flow Pro Widget to get the most important information when flying on Vatsim as popups. Also supports just showing the simbrief data without vatsim connection.
Predict and earn Loyalty Points!
New content from creators you follow
Discussies en inzichten van de community
Showcase van door gebruikers geüploade afbeeldingen
Ranglijst van onze populairste makers
Ontdek de nieuwste community-beoordelingen
Lees de nieuwste updates op het gebied van vluchtsimulatie
Contribute and collect badges
Bekijk de volledige lijst met add-ons
Een uitgebreide lijst van nieuwe uploads
Trending add-ons van de dag
Populairste updates van de dag
Meest recent bijgewerkte add-ons
De meest gedownloade add-ons van vandaag
Verken het volledige spectrum van beschikbare liveries
Ontdek de nieuwste toevoegingen aan onze bibliotheek
Bekijk de nieuwste verbeteringen aan bestaande content
Bekijk wat op dit moment populair is in de community
Ontdek welke releases deze maand de tophitlijsten halen
Bekijk onze populairste downloads tot nu toe
Ontdek het landschap van wereldwijde luchthavens tot wildernisstroken
Ontdek de nieuwste toevoegingen aan onze bibliotheek
Bekijk de nieuwste verbeteringen aan bestaande content
Bekijk wat op dit moment populair is in de community
Toegangspoort tot de wereld: Internationale luchthavens beleven
Stadslandschappen in een nieuw jasje: Ontdek uitbreidingen voor stadslandschappen
Jouw wereld, verbeterd: Navigeer door onze Scenery Map voor nog meer inhoud
Blader door ons volledige aanbod vluchtsimulatie-inhoud
Ontdek de nieuwste toevoegingen aan onze bibliotheek
Ontdek de nieuwste toevoegingen aan onze vliegtuigcollectie
Bekijk wat op dit moment populair is in de community
Verken verschillende helikoptermodellen voor een verhoogde vliegervaring
Diverse vloot van civiele vliegtuigen voor vluchtsimulatie
Pas uw gronddiensten aan met gedetailleerde GSX-profielen
Essentiële vluchtchecklists voor veilig en efficiënt gebruik van het vliegtuig
View the most recent collections
A wide range of authentic airplane liveries
Immersive Environmental Upgrades
Indispensable add-ons
Editor's Choice: Top Monthly Add-Ons
Community Choice: Best Add-Ons 2023
Nieuwste producten in de lucht
Blader door alle beschikbare categorieën
Ontdek onze partners en ontwikkelaars
Ontdek favorieten uit de gemeenschap
Vlieg meer en geef minder uit
Laatste updates
Alle uitbreidingen op onze uitgebreide kaart
Dien hier uw aangepaste livery-ontwerpaanvragen in
Nieuwe landschappen voorstellen voor ontwikkeling
De voortgang volgen van aanvragen waarin je geïnteresseerd bent
Ontdek de nieuwste vervulde verzoeken
(NOT AI Generated) Flow Pro Widget to get the most important information when flying on Vatsim as popups. Also supports just showing the simbrief data without vatsim connection.
Getting tired of double clicking frequencies in vPilot, i created a widget that actively informs me about:
The Information is also displayed initially once the widget recognizes you being online on Vatsim. Simbrief data pops up very soon after spawning if there is a flight plan created less than 4 hours ago.
The intention of this widget is that you set it up once and then don't have to actively interact with it except for reading the popups and discarding them (close popups by clicking text in the respective popup once acknowledged or by setting up an auto-close interval in the settings).
ATIS, Controller Info and Online ATC Frequencies are only shown once you connect to VATSIM and have a Flight Plan attached (only possible if you enter the Pilot ID in the widget settings), it may take a minute after logging on plus the interval you set in the settings for fetching the data.
Initially the ATIS+Frequencies for the departure airport are shown. Once you go above 5000ft AGL, it switches to arrival airport. The widget always shows which airport is monitored. The case that a Departure and Arrival ATIS are available separately is also taken care of (e.g. EDDF_D_ATIS and EDDF_A_ATIS, the correct one will be chosen).
If Origin/Destination changes, it switches back to departure airport if you're below 5000ft (turnaround).
ATIS:
ATIS has some information highlighted (Info/Information, Wind, Runway,...) if it matches a certain standard wording.
Controller Info:
Controller info is highlighted if it contains CPDLC/DLC/PDC in the text.
If the controller info contains URLs, they are underlined and can be clicked to open a windows browser to that URL.
Switching to 122.800 shows "UNICOM" to confirm the right frequency is dialed.
Switching to a frequency with no controller online shows an information about this so that pilot is aware of wrong frequency switches.
Frequencies:
Frequencies are shown in a top-down order with color coded letters.
Hovering a frequency shows a tooltip with the controller info of that frequency (if available). If the controller info contains URLs, they are underlined and can be clicked to open a windows browser to that URL.
Clicking on the colored icon of a frequency sets this frequency into COM1 standby.
If enabled in the settings, the Frequencies window will also always show the CTAF Frequency for VatUS CTAF trial but only real world CTAF published by FAA.
Simbrief data:
If you enter a Simbrief ID (not the username, it has to be the numeric ID), you will get a popup when spawning showing your current simbrief flightplan if it has been created less than 4 hours ago.
The popup will show the most important data as an overview, each of the data fields has a tooltips with details or explaination if you hover it with the cursor.
If you have entered a Vatsim Pilot ID, this popup will show a "Prefile on Vatsim" button which will open a browser window prefilling all the data from simbrief in case you forgot to file. The button will be hidden once clicked or once you're online on vatsim and origin+destination match your routing.
Note that the Simbrief popup can be used without Vatsim Pilot ID and will simply act as a single popup showing the data without prefiling options and with no Vatsim popups.
If the widget in the wheel is clicked the monitoring/polling can be turned on/off, no matter if off or on you can get the current data by:
- scrolling mouse wheel "up" while hovering the widget in the wheel will update vatsim data only (simbrief popup will not show if closed)
- scrolling mouse wheel "down" while hovering the widget in the wheel will update vatsim+simbrief data and show all popups (if enabled)
The popup windows can be moved (together) across the screen using the title bar.
Each popup individually can be dismissed by clicking on its text content (there is also an optional individual auto-close interval that can be set in the widget settings).
NOTES / known issues:
If the last controller goes offline (no active frequencies) or the ATIS gets disabled (both resulting in an empty text), no popup is shown!
Polling is usually done every 2 minutes but can be changed - CAUTION: Every time it needs to download a ~1.5MB file from Vatsim, so be aware of that.
The Frequencies are found using the Airport ICAO code (IATA code for Kxxx airports), it only lists the frequencies that start with the airport code. Therefore Radar/Center are not displayed.
If multiple controllers are online with the same frequency (worldwide), all Controllers are listed in the Controller Info. Unfortunately it's complex to correlate current aircraft position to find the correct controller among those.
Controller Info is not updated automatically, it only shows when switching frequency or triggering a manual update (scroll mouse on the widget in the Flow Wheel or click to turn it off and back on again). Usually the info does not change and the auto-update led to the popup being shown when other controllers with the same frequency went online which is irrelevant.
Just put the content of the ZIP into your Community folder. After sim restart you'll have a Category "VATSIM" containing the widget.
Drag the widget on your wheel, on the right put in your VATSIM Pilot ID and check if the other settings suit your needs.
NOTE: Please make sure your Flow Pro is up to date!
2.1.7:
Improved CTAF availability - If no official CTAF frequency is available, the airport's TWR frequency will be used and indicated as "CTAF xxxx (TWR)". In such cases I can't be 100% sure if that's the right frequency if the airport has more than one tower frequency.
Improved URL recognition to not highlight invalid URLs in ATIS and controller info.
2.1.6 Small bugfix update for arrival ATIS.
NEW 2.1.5: CTAF Frequencies
- If enabled (default), the Frequencies popup will also include CTAF Frequencies (based on a list of around 2300 airports) to support VatUS CTAF trial
- The CTAF Frequency will be shown (if available and enabled) independent of whether ATC is online or not
- Note that the CTAF Frequency might not show up immediately with other frequencies but instead take one more refresh cycle due to asynchronuous query
- Only supported for airports with an ICAO code and only data published by FAA for airports having a CTAF frequency in real life.
- Please provide feedback if there are any issues since I'm usually not flying in the US
NEW 2.1.4: Simbrief Popup
- Enter your Simbrief User ID (not the name!) in the widget settings if you want to use it
- Shows a dialog on start containing current simbrief flight plan data if flight plan calculated less than 4 hours ago
- Allows Prefiling on Vatsim directly (opens a browser window) - this button is hidden once clicked if the widget sees you online on vatsim and origin+destination match with the flight plan
- Tooltips for each item on the Simbrief popup give more details or explaination
- Simbrief popup works even without Vatsim, if you're not using vatsim just don't enter any Vatsim ID and use it for Simbrief only - in that case the Prefile button is hidden too
Further improvements
- Tooltips are now bright to separate them better from the main panels
- URLs are more strict to not recognize frequencies as URLs making them clickable
- ATIS Text is now also checked for URLs which are underlined and clickable
- All facility types now have a letter and box (Observers O and Eurocontrol/FlightInformation F)
- Scrolling UP on the widget refreshes Vatsim data. Scrolling DOWN on the widget refreshes Vatsim+Simbrief data.
- Fixed ATIS display in US and Frequencies display in Hawaii
Pittig leeg hier.
Volgens de wet heeft alleen de persoon of entiteit waarvan het auteursrechtelijk beschermde werk is gestolen, het recht om een auteursrechtclaim in te dienen. De wet verbiedt ons verzoeken van derden te behandelen als u niet de eigenaar, een wettelijke vertegenwoordiger of auteursrechthebbende bent van de inhoud in kwestie. Wij vragen u daarom contact op te nemen met de rechtmatige auteur van de inhoud en hen te informeren over deze kwestie. Alleen zij kunnen een DMCA-klacht indienen.
We kindly ask you to understand that we cannot process copyright requests through this form, as we are required to receive such correspondence in the form of a formal complaint to comply with the Digital Millennium Copyright Act. Please familiarize yourself with the DMCA procedure and send us your notification to the address below. Please note that incomplete or invalid complaints will not be processed.
In accordance with our policy, we respond to notifications of alleged copyright infringement that comply with the Digital Millennium Copyright Act on the U.S. Copyright Office website and other applicable intellectual property laws. Our response may include blocking access to or removing allegedly infringing material and/or terminating accounts. If we remove or disable access to material as a result of such a notification, we may notify the owner or administrator of the affected content to provide a counter-notification.
Meld je hieronder aan bij je account of maak binnen een paar seconden een gratis account aan.
NEILCM
copper author
3 months ago
rangirehua
Unfortunately the newest version is somehow not visible in Flow Pro.
I tried everything, it's just not in the settings where I can choose which addon I want to use. All your last versions where there and had no issues.
Anyway, i use the older one until a newer version will be out or I see what caused the problem.
Keep rolling...
Cheers
copper author
4 months ago
Bojan075
copper author
4 months ago
BetterPilot
copper author
4 months ago
Wassergeist
copper author
4 months ago
Iunoi
copper author
5 months ago
ThrottleHold
anton2023
bluef16
copper author
5 months ago