Asobo's DR400 in I-ITBB tug livery operating at Aeroclub Adele Orsi - LILC
UPDATE
I managed to make it usable again for towing without distorting it like the previous version
I need feedback if that's okay
Take-off with DG808 is difficult and at the limit of stall, I recommend keeping the flaps in position L or at most T2 otherwise it stalls
kitakaze
I have tried with DG-1001 and Discus-2C and both have the same condition.
Is there anyone else besides me who is experiencing this?
Jazz82 author
9 days ago
hugojans
Jazz82 author
5 months ago
kitakaze
It is so wonderful.
Jazz82 author
9 months ago
Gouaill
Thanks!
Jazz82 author
9 months ago
Fliegerpapa
MRTNAIRLINES
Hello. My engine will no longer start. Even with an empty community folder. So far I have never had any problems with this plane. Oddly enough, this is not the case with the Asobo DR400 and here the engine can be started normally. What could be the problem? Thanks!
Jazz82 author
I don't know, this time I changed some parameters of the flight model, only things concerning the angle of attack and the lift coefficient. I don't think they affect the engine or anything else.
Have you also tried ctrl+e?
Now I'll try to see if it gives me problems too.
1 years ago
MRTNAIRLINES
What was the problem with the towing function....? Thanks!
Jazz82 author
To obtain a not too aggressive towing, especially as regards the rate of climb, I had to touch so many parameters, even at random because there is no guide on the matter, that inevitably some things went out of place such as the height of the aircraft relative to the ground when on the ground, the position of lights away from the wings, and fuel problems, warning lights, etc.
1 years ago
hugojans
It seems the remorqueur always sits 4ft above ground (wheels not touching ground). Anything else is OK, flying on itself, or as remorqueur. Any clue? Changing static_cg_height = 3.92 to eg. 0.00 in flight_model.cfg does not seem to work...
Jazz82 author
I know, unfortunately to have a not too aggressive towing as it would be using the default DR400, I had to do a mix between different FlightModel.cfg and anything I touch has no effect or even the aircraft, using it as a tug, climbs too much and gliders such as the DG808 stall resulting in a broken cable and crash.
As I have already written, at the moment I have not found any indications on how to solve it. In fact I created it to be used as a tow, at most I could upload the only skin to use with the default DR400
1 years ago
TantalicData801
Témoin de réserve carburant continuellement allumé, appareil ne touchant pas le sol...C'est dommage, c'était mieux avant la mise à jour! Désolé!
Jazz82 author
Hi, thanks for reporting.
I had a look and actually I noticed some other problems, not only what you say but to have a towing more similar to the default Cessna I had to twist a few things, otherwise there would have been problems with takeoff stall, especially with the DG808.
My mod is only meant to be used as a tow and frankly, having never used the mod to fly I didn't notice it.
Regarding how to set up the trainers there is not much material, or rather, when I published the mod there was practically nothing that would help to make everything work for the best.
I hope to be able to fix everything in the future
1 years ago
EDTQ
Fine, super
It works
Jazz82 author
thank you! I'm glad to hear it
2 years ago